Call Us! 1 (888) 722-8260

Bronze Bar: Solid, Cored, Plate

Diversified Bronze carries the most popular bronze bar stock. The following continuous cast bronze bar, tube and plate products are available and always in stock at our location. We ship these products from our location in Cambridge, MN as well as from locations in Texas, Pennsylvania, Ohio, Alabama and New Jersey so no matter where you are in the country, you’re never far from Diversified Bronze.

Need a part made-to-order? Diversified Bronze & Manufacturing, Inc. is also a custom machine shop.


Solid Bar Stock


Cored Bar Stock


Plate Stock

 

Material Specifications

C93200/ SAE 660 C95400 / SAE J461
Aluminum Bronze
C86300 / SAE 430B
Mangenese Bronze
ASTM B-144-52-3B
Copper 81.00 – 85.00%
Tin 6.25 – 7.50%
Lead 6.00 – 8.00%
Zinc 2.00 – 4.00%
ASTM B505-08
Copper 83.00% min.
Aluminum 10.00 – 11.50%
Iron 3.00 – 5.00%
ASTM B22
Copper 60.00 – 66.0%
Zinc 22.00 – 28.0%
Iron 2.00 – 4.00%
Aluminum 5.00 – 7.50%
Mangenese 2.50 – 5.00%
Tensile Strength 44,000 PSI
Yield Strength 24,000 PSI
Elongation in 2 inches 16%
Tensile Strength 95,000 PSI
Yield Strength 45,000 PSI
Elongation in 2 inches 10%
Tensile Strength 110,000 PSI
Yield Strength 62,000 PSI
Elongation in 2 inches 14%
** PV 75,000
P = 3,000
V = 750
PV 125,000
P = 4,000
V = 225
PV 150,000
P = 8,000
V = 4000
Min. Temp: -450F
Max. Temp: +500F
Min. Temp: -450F
Max. Temp: +750F
Min. Temp: -450F
Max. Temp: +400F

**Loads and Speeds
Load and speed limitations must be ascertained in order to insure proper bearing design. If design limits
are exceeded, the bearing life will decrease and could result in premature failure. To determine the capacity
of a bearing, use the following PV formula.

PV = The load per square inch of project area
P = Load
I.D. x Length

V = Shaft velocity in feet per minute